Replaces old brass shut off float pick up assemblies.
Fits inside 3 1/2 " or 4" Brine Well. NOTE: Shut Off is at the BOTTOM, which may be different than your older version ( which typically were at the top ) and the tubing connection is made at the "top" with included 3/8" Elbow ( AFTER cutting to your required height ).
Clack's
464 Brine Safety Float Pickup Tube comes 35" tall and can replace
most old brass type brine shut of assemblies. Comes with 3/8"
Union Elbow ( 58506SG ).
NOTE: This can be cut down to fit your salt tank.
How far off the bottom should the brine pickup tube go ? (Touch the bottom, 1" off, etc.).
Normally touching the bottom, but also okay if slightly above.
Also at what level should the shut off float be placed?
As high as it will go. Above the 50% level of your brine tank, but below any Overflow fitting you might have ( which is usually installed about the 75 - 80% height level of the brine tank ).
