Seal Kit with INSTRUCTIONS for Sears, GE, North Star 7129716 replaces 7092163 and 7134224 G.E. part # WS35X10005 Includes our diagram key nos 24 - 29 ( kit # 30 ) and silicone.
If your Valve is not drawing brine, and you have replaced the Nozzle Venturi Gasket ( PN 7204362 ) or it looks good, THEN the next most likely cause of the problem is worn out Seal Orings. Replacing the Seal Kit is very easy. Each oring only fits where it belows.
It is recommended to check the surface of the Rotor Disc also, and replace if scratched, or if your valve has been getting STUCK ( and causing your Motor to slip or strip internal gears in the motor ).
IN STOCK ** SHIPS IN 24 HOURS ** ARRIVES IN 2 - 5 Days Standard Shipping or 2 - 3 days Priority Mail.
Rebuilding Valve: A scratched, worn, or warped Rotor Disc must be replaced.
Seal Kit ( 7129716 ) should always be replaced at the same time. And may be needed more often than any other part.
If motor ( 7133008 ) has been clicking, or getting stuck, it too should be replaced at the same time to restore valve to proper operation.
Check Gasket ( 7204362 ) under Venturi Disc when ever you have a problem with brine suction, as this Gasket can get brittle with age.
